FREE SHIPPING when purchase RM 100.00 and above. Term and Condition Apply
TNG Payment available NOW
ICI DULUX
ICI DULUX
Sort by
Show result

-High gloss & excellent gloss retention
-Excellent colour fastness
-Excellent durability & fungus resistance
-Good brush loading and good sag resistance
-No added Lead and Mercury
-Certified with Malaysian Standards MS125:1995

RM40.00

Special Features:- 

~Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off.
~Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260).
~If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further

 

RM85.00

Special Features:- 

~Dulux Solarscreen Exterior Transparent Wood Finish is a durable pigmented varnish based on a special resin for protection and decoration purposes.
~Surfaces must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc.

RM40.00

Special Features:- 

~Preparing the surfaces: 

Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off. It is important to ensure that your wall is smooth and even to obtain the best results from Dulux Weathershield.Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260). If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer. It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further.

RM31.00

It is suitable for use on both new and previously painted surfaces. Good quality, water-based sealer

RM80.00

Special Features:- 

~Preparing the surfaces: 

Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off. It is important to ensure that your wall is smooth and even to obtain the best results from Dulux Weathershield.Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260). If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer. It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further.

RM130.00

Special Features:- 
~Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off.
~Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260).
~If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further

RM27.00

Special Features:- 
~Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off.
~Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260).
~If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further

RM27.00

Special Features:- 

~Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off.
~Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260).
~If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further

RM27.00

Special Features:- 

~Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off.
~Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260).
~If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further

RM27.00

Special Features:- 

~Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off.
~Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260).
~If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further

RM27.00

Special Features:- 

~Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off.
~Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260).
~If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further

RM27.00

Special Features:- 

~Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off.
~Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260).
~If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further

RM97.00

Special Features:- 

~Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off.
~Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260).
~If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further

RM27.00

Special Features:- 

~Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off.
~Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260).
~If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further

RM27.00

Special Features:- 

~Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off.
~Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260).
~If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further

RM97.00

Special Features:- 

~Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off.
~Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260).
~If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further

RM97.00

Special Features:- 
~Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off.
~Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260).
~If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further

RM97.00

Special Features:- 
~Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off.
~Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260).
~If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further

RM97.00

Special Features:- 

~Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off.
~Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260).
~If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further

RM97.00